Warnings; Installation - Physipro PROTECTOR PAD FOR LEGREST TUBE Owner's Manual

WARNINGS

•
Physipro Inc. lower limb supports are reserved exclusively for use on mobility
aids (manual or power wheelchairs).
•
Before use, let the lower limb support get to room temperature to limit
discomfort caused by excessively hot or cold surfaces.
•
Avoid exposing your lower limb support to extreme cold or heat and avoid
prolonged contact to fluids or moisture. Never place near open flame.

INSTALLATION

Note – Before installation, make sure the legrest tube is clean and dry.
1. Wrap the protector around the legrest tube and fasten the velcro.
2. If your model is equipped with eyelets, place the cord through
eyelet A and attach to the frame.
Full lenght
Knee height with eyelet
4
Protector pad for legrest tube
A
Knee height with velcro