Pull To Lock Brake; Brakes Adjustment; To Apply Brakes - Physipro XL 5 Owner's Manual

Owners manual
13.2 Pull to lock Brakes

13.2.1 Brakes adjustment

Loosen screw A using a 10mm wrench or ratchet;
1.
As needed, move the brake assembly B forward or backward;
2.
Tighten screw A.
3.

13.2.2 To apply brakes

1. Pull the handle C backward to apply the brake;
2. Push the handle C forward to release the brake.
Never stop a moving wheelchair with wheel locks.
Wheel locks are not brakes.
When breaks are applied, the breaking stop must sink into the tire
by 1/8 " to ¼".
It is important to adjust the brakes if a modi cations of the rear wheels
are done or if the tires are wore out.
A
Figure 43 : Adjustment and Applying Brakes
39
B
C
ENGLISH
Revision 4
January 2015