Owners manual
6.1.2 To Uninstall Fixed axle rear wheel
Loosen nut C with a ¾" wrench while holding the axle A with
1.
a ¾" ratchet.
Remove nut C at the end of the axle A.
2.
Slide axle A outside the positioning device B.
3.
Remove axle A in the wheel.
4.
A
20", 22" or 24" rear wheels installation requires re-adjusting the location
of the wheel locks, the front wheels and the anti-tippers. See section 5.3,
12.1 and 13.2.
Always check the steadiness of the wheelchair. It may require rear wheel
horizontal adjustment. Read section 6.3.
B
Figure 15 : Fixed axle Rear Wheels Removal
19
ENGLISH
C
Revision 4
January 2015