Tally Dascom 1325
Power-On State
Function
Switch
Name
Operation
Menu Setup /
EDS
Slip Setup
Hex Dump
LED
-
Allows for Main Menu setting changes. Please read the
[S1]
instructions printed on how to change settings when this
mode is activated. (EDS: Electronic DIP Switch)
-
Configures the Slip paper profile such as top and left
[S2]
margins. Refer to Slip Setup section below for details.
-
Beeps once to indicate going into hex dump mode:
Prints data from host in hexadecimal representation.
Pressing S4 suspends the printing.
When the hex dump has finished, pressing S4 forces the
[S3]
Switch off the power to terminate the hex dump.
Function Description
printing of the last line of data, as any line termination
control code from host has no function.
17