Tally Dascom 1325
Online State
Switch
Function Name
Operation
Tear Off
LF
FF
Load/Eject
Online
LED
{S1}
-
{S2}
-
[S2]
-
{S3}
-
{S4}
L4
Function Description
This is valid for tractor mode only. It feeds the form to the
tear-off position. After tearing off the form, printing starts
on the next TOF by:
pressing S1 once, or
receiving print data from the host.
Feeds a line with every press of S2.
By holding S2, the printer initially feeds a few lines; then
feeds the form to the next TOF for rear tractor or ejects
the form for cut sheets.
Load: Automatically loads the paper (according to path
selection) when no paper is on the platen.
Eject: For rear tractor, it retracts the form from the
platen to allow users to install cut sheets. (NOTE:
Users have to toggle the path selection lever.)
For cut sheets, it ejects the form on the platen.
Toggles between Online and Offline states.
15