Interface Setup; Advanced Setup - Dascom Tally 1325 User Manual

Tally Dascom 1325

Interface Setup

Interface
Valid Settings
Setup
Interface Auto, Parallel, USB
I-PRIME Yes, No
Auto IF
10s, 30s
Delay
RAM Usage User Font, Buffer

Advanced Setup

Advanced Setup
Auto Load
Paper Jam
Prevention
Paper End Detect
Form Length Ctrl
Pitch Ctrl
Font Ctrl
Quality Ctrl
Buzzer
For multi-host connection. Auto: First come first served;
Parallel/USB: Serves the designated host only.
Yes: Host I-Prime signal resets the printer.
Determines the waiting time before receiving data from another
interface.
User Font: Part of RAM is used for user download characters;
Buffer: Disables user character download function; uses RAM for
expanded buffer size up to 92KB.
Valid Settings
Manual, 0.5s, 1s, 1.5s, 2s
Yes, No
Yes, No
Software, Ignore
Software, Ignore
Software, Ignore
Software, Ignore
Yes, No
Function
Specifies the waiting time before loading a cut
sheet automatically. Manual: Auto load mode is
off. (Applies to friction mode only)
Flattens paper edges by carriage movement
before printing starts.
Yes: Detects paper out and halts printing;
otherwise, ignores paper out and continues
printing.
Ignore: Ignores form length commands.
Ignore: Ignores CPI commands.
Ignore: Ignores font select commands.
Ignore: Ignores print quality commands.
Yes: Sounds buzzer on all hardware errors.
23
Function