Offline State - Dascom Tally 1325 User Manual

Tally Dascom 1325

Offline State

Switch
Function Name
Operation
Slip [S1]
Exit Dir {S2}
Load/Eject {S3}
Online {S4}
Micro Forward {S3}+[S4]
Micro Reverse {S2}+[S4]
Clear Buffer and {S1}+[S4]
Reset
LED
 Press and hold this key until printer beeps twice to activate
L2
the Slip profile mode. L2 will turn on.
 Press and hold this key until printer beeps twice to exit the
Slip profile mode. L2 will turn off.
L3 This is valid for single sheet mode only. It controls the exit
direction of the friction sheet paper.
 Load: Automatically loads the paper (according to path
selection) when no paper is on the platen.
 Eject: For rear tractor, it retracts the form from the platen to
-
allow users to install cut sheets. (NOTE: Users have to
toggle the path selection lever.)
For cut sheets, it ejects the form on the platen.
L4 Toggles between Online and Offline states
- While holding down S4, press S3 to micro feed paper up.
- While holding down S4, press S2 to micro feed paper down.
 Clears the print buffer. Beeps once upon completion.
-
 Pressing S1 longer initializes the printer to default settings.
Beeps 3 times upon completion.
16
Function Description