User Guide
Printing out the
status page
Power on + USER2 key
PAPER
USER1
STOP
USER2
SETUP
/EJECT
Print StatusPage
Load Paper
Print StatusPage
Printing...
Print StatusPage
Completed
The printer has a function that allows you to printout the current para-
meter settings.
There are two ways to print out the parameter settings.
Power on + USER2 key
Selection of "Test Print Status Page" in menu mode
PAPER
USER1
STOP
USER2
/EJECT
SETUP
PAPER
USER1
STOP
USER2
/EJECT
SETUP
PAPER
USER1
STOP
USER2
/EJECT
SETUP
Power the printer off.
Press and hold the USER2 key while swit-
ching on the printer.
The LCD displays Print StatusPage Load
Paper. Release the USER2 key.
Insert the paper in the printer. The LCD dis-
plays Print StatusPage Printing... and the
the status page is printed.
The paper will eject once printing is complete.
While printing, you can use the STOP/
EJECT key to cancel the printing. Paper will
be ejected.
When the test printout is aborted or comple-
ted, LCD will display Print StatusPage Com-
pleted.
The Print setting mode will end automatically
and a Power ON reset will be performed.
Menu
55
Need help?
Do you have a question about the T5040 and is the answer not in the manual?