Language Setup - Dascom Tally 1325 User Manual

Tally Dascom 1325
Self Test /
Status Page
Service Menu [S1]+[S2]
Adjust Page
[S3]+[S4]
Margins
Restore Factory
[S2]+[S3]+[S4]
Defaults
Firmware [S1]+[S2]+[S3]+
Update
Language
[S2]+[S3]
Setup

Language Setup

The panel menu can display the following languages: English, German, Russian, Italian, French, Spanish and
Turkish. Factory default setting is English. To change it to another language, hold down the [LF/FF] and
[Load/Eject] keys on the panel and power-on. Upon exiting the Language Setup Menu, a listing of the current
configuration is printed, and this is followed by Main Menu Setup.
Below is an example of changing from English to German language:
-
[S4] Prints the printer settings and self-test pattern.
- Vertical Alignment, Change Pin Function and Endless Self
Test
- Includes Adjust Fanfold Top Margin, Adjust Single Top
Margin, Adjust Fanfold Left Margin, Adjust Single Left
Margin and Adjust Tear-Off position.
- Restore settings to factory defaults except for Change Pin,
Vertical Alignment and Adjust Page Margin Parameters.
 Alternate flashing of L1 and L4 indicates ready for
L1, L4
 When new firmware is being received: L1 and L4 flash
[S4]
 When downloading is completed, the carriage returns to
 Allows user to select one of the following languages:
firmware update from host.
together, followed by L1 and L3 flash together.
home position. Printer initializes normally.
English, German, Russian, Italian, French, Spanish and
Turkish. Factory default is English. Refer to Language
Setup section below for details.
18