Disconnecting The Lan Cable - Toshiba TECRA A10 Satellite Pro S300 Series User Manual

2. Plug one end of the cable into the LAN jack. Press gently until you hear
3. Plug the other end of the cable into a LAN hub connector or router.
When the computer is exchanging data with the LAN, the LAN Active
indicator glows orange. When the computer is connected to a LAN hub but
is not exchanging data, the Link indicator glows green.

Disconnecting the LAN cable

To disconnect the LAN cable, follow the steps as detailed below:
Make sure the LAN Active indicator (orange LED) is out before you
disconnect the computer from the LAN.
1. Pinch the lever on the connector in the computer's LAN jack and pull
2. Disconnect the cable from the LAN hub or router in the same manner.
Downloaded from LpManual.com Manuals
User's Manual
the latch click into place.
LAN jack
Figure 4-11 Connecting the LAN cable
Check with your LAN administrator and hardware or software vendor
before using or configuring a network connection.
out the connector.
Check with your LAN administrator and hardware or software vendor
before disconnecting from the hub.
Operating Basics
LAN cable
4-39