Disconnecting Lan Cable; Cleaning The Computer - Toshiba Satellite L630 Series User Manual

Hide thumbs Also See for Satellite L630 Series:
Table of Contents

Advertisement

2.
1.LAN
3.

Disconnecting LAN Cable

To disconnect the LAN cable, follow the steps below.
1.
2.

Cleaning The Computer

To help ensure long, trouble-free operation, keep the computer free of dust
and use care with liquids around the computer.
Never spray cleaner directly onto the computer or let liquid run into any
part of it. Never use harsh or caustic chemical products to clean the
computer.
Downloaded from LpManual.com Manuals
User's Manual
Plug one end of the cable into the LAN jack. Press gently until you hear
the latch click into place.
JACK
Figure 4-10 Connecting the LAN cable
Plug the other end of the cable into a LAN hub connector. Check with
your LAN administrator before connecting to a hub.
Pinch the lever on the connector in the computer's LAN jack and pull
out the connector.
Disconnect the cable from the LAN hub in the same manner. Check
with your LAN administrator before disconnecting from the hub.
Be careful not to spill liquids into the computer. If the computer does get
wet, turn the power off immediately and let the computer dry completely
before you turn it on again.
Clean the computer using a slightly damp (with water) cloth. You can
use glass cleaner on the display. Spray a small amount of cleaner on a
soft, clean cloth and wipe the screen gently with the cloth.
Operating Basics
4-37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents