Connecting Lan Cable; Disconnecting Lan Cable; Cleaning The Computer - Toshiba Satellite P500 User Manual

Connecting LAN cable

To connect the LAN cable, follow the steps below.
1. Turn off the power to the computer and to all external devices
2. Plug one end of the cable into the LAN jack. Press gently until you hear
3. Plug the other end of the cable into a LAN hub connector. Check with

Disconnecting LAN cable

To disconnect the LAN cable, follow the steps below.
1. Pinch the lever on the connector in the computer's LAN jack and pull
2. Disconnect the cable from the LAN hub in the same manner. Check

Cleaning the computer

To help ensure long, trouble-free operation, keep the computer free of dust
and use care with liquids around the computer.
■
■
Downloaded from LpManual.com Manuals
User's Manual
connected to the computer.
the latch click into place.
your LAN administrator before connecting to a hub.
out the connector.
with your LAN administrator before disconnecting from the hub.
Be careful not to spill liquids into the computer. If the computer does get
wet, turn the power off immediately and let the computer dry completely
before you turn it on again.
Clean the computer using a slightly damp (with water) cloth. You can
use glass cleaner on the display. Spray a small amount of cleaner on a
soft, clean cloth and wipe the screen gently with the cloth.
Connecting the LAN cable
Operating Basics
4-45