Installing The Battery Pack - Toshiba TECRA A10 Satellite Pro S300 Series User Manual

6. Slide and hold the battery release latch (2) to disengage the battery

Installing the battery pack

To install a battery pack, follow the steps as detailed below:
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1. Insert the battery pack as far as it will go into the computer (1).
2. Ensure that the battery pack is securely in place and the battery lock (2)
Battery lock
3. Turn your computer over.
Downloaded from LpManual.com Manuals
User's Manual
pack and then remove it from the computer (3).
Battery pack
Battery lock
Figure 6-1 Releasing the battery pack
is in its ( ) position.
Battery pack
Figure 6-2 Securing the battery pack
Power and Power-Up Modes
Battery
release latch
6-9