System Recovery - Toshiba TECRA A10 Satellite Pro S300 Series User Manual

System Recovery

This section describes the creation of Recovery Discs and their use.
Creating Optical Recovery Discs
This section describes how to create Recovery Discs.
■
■
■
■
■
■
■
■
■
■
A recovery image of the software on your computer is stored on the hard
disk drive, and can be copied to either CD or DVD media by using the
following steps:
1. Select either blank CD or DVD media.
2. The application will allow you to choose from a variety of different media
Please note that some of the above media may not be compatible with the
optical disc drive installed into your computer. You should therefore verify
the optical disc drive supports the blank media you have chosen before
proceeding.
3. Turn on your computer and allow it to load the Windows Vista operating
4. Insert the first blank media into the optical disc drive tray.
5. Double click the Recovery Disc Creator icon on the Windows Vista
6. After Recovery Disc Creator starts, select the type of media and the title
Downloaded from LpManual.com Manuals
User's Manual
Be sure to connect the AC adaptor when you create Recovery Discs.
Be sure to close all other software programs except the Recovery Disc
Creator.
Do not run software such as screen savers which can put a heavy load
on the CPU.
Operate the computer at full power.
Do not use power-saving features.
Do not write to the disc when the virus check software is running. Wait
for it to finish, then disable virus detection programs including any
software that checks files automatically in the background.
Do not use utilities, including those intended to enhance hard disk drive
access speed. They may cause unstable operation and damage data.
Do not shut down/log off or Sleep/Hibernate while writing or rewriting
the disc.
Set the computer on a level surface and avoid places subjected to
vibrations such as airplanes, trains, or cars.
Do not use on an unstable surface such as a stand.
onto which the recovery image can be copied including CD-R, CD-RW,
DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL and DVD+RW.
system from the hard disk drive as normal.
desktop, or select the application from Start Menu.
you wish to copy, and then click the Create button.
Getting Started
1-13