Using The Hard Disk Drive (Hdd) Protection - Toshiba TECRA A10 Satellite Pro S300 Series User Manual

■
■
■
■

Using the Hard Disk Drive (HDD) Protection

This computer has a function for reducing the risk of damage on the hard
disk drive.
Using an acceleration sensor built into the computer, TOSHIBA HDD
Protection detects vibration shocks and similar signs of movement of the
computer, and automatically moves the Hard Disk Drive head to a safe
position to reduce the risk of damage that could be caused by head-to-disk
contact.
■
■
When vibration is detected, a message will be displayed on the screen, and
the icon in the Taskbar notification area will change to the protection state.
This message is displayed until the OK button is pressed or 30 seconds
pass. When vibration subsides, the icon returns to the normal state.
Taskbar icon
State
Normal
Protection
OFF
Downloaded from LpManual.com Manuals
User's Manual
Never transport your computer with any cards installed - this may cause
damage to either the computer and/or the card resulting in product
failure.
Always use a suitable carry case when transporting the computer.
When carrying your computer, be sure to hold it securely so that it does
not fall or hit anything.
Do not carry your computer by holding any of its protruding elements.
The TOSHIBA HDD Protection function does not guarantee that the
hard disk drive will not be damaged.
TOSHIBA HDD Protection cannot be used in models that are equipped
with SSD.
Icon Description
TOSHIBA HDD Protection is enabled.
TOSHIBA HDD Protection is active. The
hard disk drive head is in a safe position.
TOSHIBA HDD Protection is disabled.
Operating Basics
4-41