Removing A Pc Card; Smart Card - Toshiba TECRA A10 Satellite Pro S300 Series User Manual

Removing a PC Card

To remove a PC Card, follow the steps as detailed below:
1. Open the Safely Remove Hardware icon on the Windows Taskbar.
2. Point to PC Card and click the left Touch Pad control button.
3. Press the PC Card eject button to partially extend it out of the computer.
If the PC Card is not inserted all the way into the computer, the eject button
may not cause it to pop out sufficiently to allows it to be grasped. In this
instance, simply push the PC Card firmly back into the computer and then
press the eject button again.
4. Press the extended PC Card eject button in order to eject the PC Card
5. Grasp the PC Card and remove it.

Smart Card

A Smart Card is a credit card sized plastic card. An extremely thin
integrated circuit (IC chip) is embedded into the card on which information
can be recorded. These cards can be used for a wide variety of
applications including telephone related and electronic monetary
payments.
This section contains information on the proper use of the Smart Card slot,
and it is strongly recommended that you read it before operating the
computer.
Some models are equipped with a Smart Card slot.
■
■
Downloaded from LpManual.com Manuals
User's Manual
partially out of the computer.
PC Card
eject button
Figure 3-2 Removing the PC Card
Your computer supports ISO7816-3 asynchronous cards (support
protocols are T=0 and T=1) with a working voltage of 5V.
The computer is equipped with either a PC Card slot or a Smart Card
slot.
Hardware, Utilities and Options
PC Card
3-17