Starting The Toshiba Pc Health Monitor; If A Toshiba Pc Health Monitor Message Is Displayed - Toshiba TECRA A10 Satellite Pro S300 Series User Manual

The TOSHIBA PC Health Monitor software does not extend or modify
Toshiba's obligations under its standard limited warranty in any way.
Toshiba's standard limited warranty terms and limitations apply.

Starting the TOSHIBA PC Health Monitor

The TOSHIBA PC Health Monitor can be started using the following
methods:
■
■
■
No matter which method is used, the TOSHIBA PC Health Monitor
explanation screen will be displayed.
Clicking "Next" will display the "TOSHIBA PC Health Monitor
Software Notice & Acceptance" screen. Please carefully read the
information displayed. Selecting "Enable this software program now"
and clicking "OK" will enable the program. By enabling the TOSHIBA PC
Health Monitor software, you agree with these terms and conditions and to
the use and sharing of the collected information. Once the program is
enabled, the TOSHIBA PC Health Monitor screen is displayed, and the
program will begin monitoring system functions and collecting information.
(*) This message will no longer be displayed after clicking "Enable this
software program now" or "Disable this software program now" on the
"TOSHIBA PC Health Monitor Software Notice & Acceptance"
screen.

If a TOSHIBA PC Health Monitor message is displayed.

A message will be displayed if any changes which may interfere with the
operation of the program are detected. Follow the instructions displayed on
screen in the message. However, if the following special message is
displayed, carry out the procedures listed below.
If the "It is possible that the PC cooling performance has
decreased. Please click [OK] to run the TOSHIBA Cooling
Performance Diagnostic Tool to check the cooling
performance of your PC." message is displayed.
1. Click "OK" to start the "TOSHIBA Cooling Performance Diagnostic
Downloaded from LpManual.com Manuals
User's Manual
Double click TOSHIBA PC Health Monitor in the Welcome Center.
Click Start -> All Programs -> TOSHIBA -> Utilities -> PC Health
Monitor.
Click the icon (
PC Health Monitor is not enabled. Please click here
for more details." message when it is displayed. (*)
Tool".
) in the notification area, then click the "TOSHIBA
TOSHIBA PC Health Monitor
G-2