Fingerprint Registration - Toshiba TECRA A10 Satellite Pro S300 Series User Manual

■
■
■
Setup Procedure
Please use the following procedure when first using fingerprint
authentication.

Fingerprint Registration

You should initially enroll the required authentication data using the
Fingerprint Enrollment Wizard.
■
■
1. To run this program, click Start -> All Programs -> TrueSuite Access
You are also able to start the Fingerprint Enrollment Wizard by using the
following methods.
■
2. The Verify screen will be displayed, enter the Windows logon password
3. On the User's Fingers screen click the box above the finger you wish
4. The Fingerprint Enrollment screen will be displayed and the tutorial
5. At the Scanning Practice screen, you are able to practice swiping
Downloaded from LpManual.com Manuals
User's Manual
Check the position and speed at which you swipe your finger across the
sensor - please refer to the preceding drawing.
The fingerprint sensor compares and analyzes the unique
characteristics in a fingerprint. However, there may be instances where
certain users are unable to register their fingerprints due to insufficient
unique characteristics in their fingerprints.
The recognition success rate may differ from user to user.
In use, the fingerprint authentication system will use the same
username and password as defined within the Windows operating
system. If no Windows password has been configured, you must do
this before starting the fingerprint registration process.
This sensor has the memory space for at least twenty-one fingerprint
patterns. You might be able to register more fingerprint patterns
depending on the sensor memory usage.
Manager -> TrueSuite Access Manager.
Click the Fingerprint Application icon in the Taskbar.
and click the Next button.
to register.
If any of the previously enrolled fingerprints is selected again, the latest
information will be enrolled and any previous information over-written.
will begin. First click "Replay video" and confirm the proper movement
for the finger you wish to register. Then confirm the message displayed
on this screen and ensure that there is a check mark in the Run
Interactive Tutorial box. Once this has been done, click Next.
(three times) your finger to ensure you use the correct method. Click
"Try again" to if you wish to practice again. You have finished
practicing, click Next button.
Operating Basics
4-6