Dual Pointing Device - Toshiba TECRA A10 Satellite Pro S300 Series User Manual

MultiMediaCard
For further information, please refer to Chapter 3,
Options.
Problem
MultiMediaCard error
occurs
You cannot write to a
MultiMediaCard
You cannot read a file

Dual Pointing device

If you are using a USB mouse, you should also refer to both the
device
mouse.
Touch Pad/AccuPoint
Problem
Either the Touch Pad
or the AccuPoint does
not work.
On-screen pointer does
not respond to pointing
device operation
Double-tapping
(Touch Pad) or
double-clicking
(AccuPoint) does not
work
Downloaded from LpManual.com Manuals
User's Manual
Procedure
Remove the MultiMediaCard from the computer
and then reinsert it in order to ensure it is firmly
connected.
If the problem persists, then you should refer to
the documentation supplied with your
MultiMediaCard for further information.
Remove the MultiMediaCard from the computer
and check to ensure that it is not write protected.
Check to ensure the required file is actually on
the MultiMediaCard that is inserted into the
computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
section in this chapter, and the documentation supplied with your
Procedure
Check the Device Select settings.
Click Start -> Control Panel -> Hardware and
Sound -> Mouse icon.
Pressing FN + F9 to enables.
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start -> Control
2. Within the Mouse Properties window, click
3. Set the double-click speed as required and
Panel -> Hardware and Sound -> Mouse icon.
the Buttons tab.
click OK.
Troubleshooting
Hardware, Utilities and
USB
8-16