Before First Use - Fakir SkyJET Instructions Manual

GB
9. Water Filling cap
to prevent lint from entering water tank and stops water spilling from the iron. The
wide water inlet allows for easy filling, without bubbling.
10. Spray Nozzle
11. Profiled soleplate with directional precondition steam and full length button groove
a)Ceramic coated soleplate
b)Hard Anodized Soleplate
12.Maximum Water Level Indicator
Do not exceed the maximum water level when the iron is in the upright position.
13. Temperature Dial
Temperature selection from minimum ( synthetics) through to maximum (linen).
14. Heating Indicator
Light and Dial lndicator.
Light turns off when selected temperature is reached.
15. Built- in Anti- Calc Filter.
16. Extra Large, Easy- fill Water Tank with On/ Off Illumination
Large water tank for continual high steam performance, without having to refill the
tank regularly.When the iron is connected to a power supply the water tank will
illuminate showing that the iron is On. The On indicator light turns on as long as the
iron is plugged in.When the plug is disconnected from the power supply the On
indicator light turns off.
17. Dry Tank Alert Light
The light illuminates when the water tank is nearly empty
and needs topping up with water. It is important to keep
the water tank adequately filled with water to ensure optimum steam production.

Before first use

• Check if the voltage rating on the appliance corresponds to the local mains voltage
before you connect the appliance.
• Remove any sticker or protective cover from the soleplate before using the iron.
• Use for the first time on a piece of damp cloth to remove any residue on the soleplate.
• When first used some vapour may be emitted.This will cease after a short while.
SkyJET
22