Operating; Before First Use; Operation - Fakir EYE Instruction Manual

Before first use

Operation

(Fig. 1)
(Fig. 2)
(Fig. 3) (Fig. 4)

OPERATING

1. Remove any sticker, protective foil or storage cover from
the soleplate.
2. Heat up the iron to maximum temperature and iron over a
piece of damp cloth for several minutes on the purpose of
removing any residue on the soleplate.
NOTE!
It is normal that strange odor comes out from the unit
for the first use.
1.Hold the iron in a tilted position, then fill proper water into
water tank. by measuring cup, you had better use purified
water with less calcium particles and make sure not to
exceed Max level on the tank. (Fig 1.)
2. Press down cover of water tank and you will hear a click if
it is in the correct position.
3. Connect plug to outlet and turn temperature dial to your
desired setting, which is depended on the fabric of
garment. And indicator light will be illuminated. Refer to
Fig.2 and IRONING TIPS latter.
4. Make sure steam button is on dry position. (See fig 3),
then place the iron vertically (See fig 4).
5. Once soleplate temperature has reached the preset
temperature, indicator light will be off, then set steam
button to your desired steam output or dry position and
begin ironing.
6. Press spraying water button a couple of times to moisten
the laundry if necessary, before spraying make sure that
there is enough water in water tank.
7. Steam shot function had better be used at max
temperature, as it helps remove stubborn creases.
8. The iron has an anti-drip function: if ironing garments for
long time, soleplate temperature will fall off, the iron will
stop coming out steam automatically and no water droplets
can come out from soleplate.
9. "Steam shot" can also be applied when holding the iron in
a vertical position, so this is useful for removing creases
from hung clothes, curtains, etc.
GB
17