Download Print this page

Ironing Without Steam - Fakir SkyJET Instructions Manual

Check the garment label for the required ironing temperature, If you do not know what

kind(s)of fabric(s)an article is made of,determine the right ironing temperature by ironing

a part that will not be visible when you wear or use the article. Silk,woollen

and synthetic materials:iron the reverse side of the fabric to prevent shiny patches.

Avoid using the spray function to prevent stains.

• Put the iron on its heel and turn the temperature dial to minimum. Plug the cord into

the electrical outlet.

• Select the temperature setting required by rotating the temperature dial so that the

desired setting is aligned with the heating indicator light / dial indicator.

• The heating indicator light will glow showing that the iron is heating up. When the

heating indicator light has first gone out, wait for a while before start ironing. The light

will glow and go out as the thermostat maintains the selected temperature.

IMPORTANT!

The steam iron incorporates a thermal safety fuse to

protect the steam iron from over-heating. However, the

iron should not be left unattended while it is connected

to an electrical outlet. Special care should always be

taken when there are children in the home.

Fig. 1

Ironing without steam

Turn the steam selector knob to position '

temperature dial most suitable for the fabric to be ironed. Once the temperature has

been reached, ironing may commence.

SkyJET

' (Figure 1). Select the setting on the

Table of Contents

Table of Contents