Adjusting The Clock; Before Operation - Sanyo MAJ-R70 Instruction Manual

REMOTE CONTROLLER
Controls (Fig.3)
1. ON Key
2. TIMER/SLEEP Key
3 ~ 1 . 1 N U M B E R K e y
12. OVER Key
13. NUMBER Key
14. MEMO/CLOCK Key
15. FUNCTION Key
16.
key
17. VOLUME+ Key
18. TUNNING/FILE-
B
19. STOP Key
C
20. TUNNING/FILE+
F
21. VOLUME- Key
22.
INFO/BIT-SEL Key
23. MUTE Key
24. USB / Key
R P
25. CD Key
/
R P
26. SD Key
/
R P
27. FM MODE/FIND Key
28. FOLDER/PRESET Key (only up)
29. TUNER/BAND Key
30. SOUND Key
31. RAND./INTRO Key
32. REPEAT Key
Inserting batteries (Fig. 4)
Note:
Always remove batteries if the remote controller
is not to be used for a month or more. Batteries
left in it may leak and cause damage.
Remote control range (Fig. 5)
The button on the remote controller perform sim-
ilar function to similarly marked buttons on the
front panels of the main unit.

ADJUSTING THE CLOCK

The clock can be set only on standby mode.
1. Press the MEMO/CLK ADJ. button,or MEMO/
CLOCK on remote control. until the"hour"
section blinks.
2. Press the SKIP+/UP or SKIP-/DOWN to set
the "hour" section.
3. Press the MEMO/CLK ADJ button or MEMO/
CLOCK on remote control .The "minute"
section blinks.
Key
Key
00 : 00
06 : 00
06 : 00
4. Press the SKIP+/UP or SKIP-/DOWN to set
the "minute" section.
5. Press the MEMO/CLK ADJ buttonor MEMO/
CLOCK on remote control .The clock starts.
Note:
- If a power failure occurs or the mains lead
is disconnected, LCD appears 00:00,reset the
clock again.

BEFORE OPERATION

Turning the power on and off
- Press the /ON button to turn on the
power, the display lights.
- To turn the power off, press the
again.
- When the mains lead is connected to the AC
outlet, the unit will respond to commands
from the remote controller.
Selecting the function
Press the FUNCTION button to select the de-
sired function.
Each time the button is pressed, the display
change as follow:
CD Function USB Function
tion LINE IN
Function ......
Adjusting the Volume
Turn the volume control ( or press the vol- or
vol + button on the remote controller). the volume
level appears on the display (Vol MIN ~MAX)
Selecting the sound preset
Press the EQ button on the remote controller to
select the sound mode matching the music to be
listened to:
EQ CLASSIC:
EQ ROCK:
EQ POP:
EQ JAZZ:
FLAT:
EN-8
06 : 0 0
06 : 30
/ON button
CARD Func-
TUNER Function
Classic, music etc
Rock, music etc
Pops, music etc
Jazz, music etc
EQ , off
CD