Listening To The Radio; Listening To Preset Stations; Listening To Other Sources - Sanyo MAJ-R70 Instruction Manual

LISTENING TO THE RADIO

Automatic/Manual tuning
1. Press the FUNCTION button to select "TUN-
ER" Function.
2. Press the STOP /BAND on unit or TUNER/
BAND on remote control to select FM or AM.
The radio frequency appears on the display.
3. Automatic tuning
Press the or
F B
to tune in a station.
The unit will scan up or down the band and re-
ceive the next receivable station. Press the
buttton to continue.
Manual tuning
Press the or
F B
sired frequency display.
To preset stations
Up to 30FM and 15AM stations can be preset.
1. Tune in the stations to be preset as described
above.
2. Press the MEMO/CLK ADJ button (or the
MEMO /CLOCK button on the remote control-
ler).
3. While "PROG". Is blinking press the ALBUM/
PRESET DN/UP or FOLDER/PRESET button
on the remote controller to select the channel
number to be preset.
button for at least 1 second
button brie fly until the de
EN-17
4. While "PROG". is blinking press the MEMO/
CLK ADJ button (or the MEMO /CLOCK but-
ton on the remote controller).
5. Repeat steps above to add more Preset
stations.
- When presetting a new station, the previous
preset station is cleared.

Listening to preset stations

1. Press the STOP /BAND or TUNER/BAND
on remote controlto select FM or AM.
2. Press the ALBUM/PRESET DN/UP or FOLDER/
PRESET button on the remote controller to select
the desiredchannel number.
To receive FM stereo broadcasts
Using the remote controller:
Press the"MONO/ST.INTRO"button on unit or
FM/MODE/FIND on remote control to select
"STEREO".
If the signal from an FM stereo broadcast is
weak and reception is poor,press the
MONO/ST.INTRO on unit or FM/MODE /FIND on
remote control to display "MONO".The reception
maybe improved, but the sound is monaural.
LISTENING TO OTHER
SOURCES
1. Press the function button to select "LINE IN
FUNCTION".
2. Follow the instructions supplied with the
video/auxiliary equipment.
FM