Before Use - Sanyo MAJ-R70 Instruction Manual

SD/MMC CARD OPERATION
• IMPORTANT INFORMATIONS •
- Copyright protection files cannot be
played back.
- Copyright protection files on SD/MMC
card are skipped automatically when
played back.

Before use

-
Load an SD/MMC card (not supplied) with the
MP3/WMA file. (See Fig. 1b)
- Down load the MP3/WMA files into the SD/
MMC card (not supplied) from your PC.
Note:
Some cards cannot be used depending on its
structure.
Basic playback
1. Press the FUNCTION button to select "CARD
FUNCTION".
Note:
- If the connection of the card is failed
or the unit cannot recognize the card,
"NO CARD" appears.
- If there's no MP3/WMA file in the card,
or just some empty folders in the card,
"NO FILE" appears.
or
2. Press the
F
sired MP3/WMA file.
3. Press the
R/ P
on the remote controller) to start playback.
4. Press the STOP
C
on the remote controller) to stop playback at
any time.
Temprarily stopping playback
Press the button (or the SD
R/ P
the remote controller).
To resume playback, press the button again.
button to select the de
B
button (or the SD
R/ P
/BAND(or the STOP
button on
R/ P
Programmed playback
Up to 32 MP3/WMA files can be programme for
playback in any order.
- First, select "CARD FUNCTION" and con-
nect the CARD memory device you want pro-
gromme to the CARD socket of the until cor-
rectly.
- The same MP3/WMA file can be programmed
more than once.
1. Press the MEMO/CLK ADJ button (or the
MEMO/CLOCK button on the remote con-
troller) in the stop mode, "PROG." appears.
2. Press the
MP3/WMA file.
3. Press the MEMO/CLK ADJ button (or the
MEMO /CLOCK button on the remote con
troller).
button
but ton
C
4. Repeat steps 2-3 above to programme add-
the
itionan MP3/WMA files.
5. Press the
on the remote controller) to start programmed
playback.
- When all programmed MP3/WMA files have
been played, it stops automatically.
- If you try to enter more than 32 MP3/WMA
fi les,"FULL" appears on the display.
EN-15
or button to select a
F B
/ button (or the SD
R P
CARD
button
R/ P