Figure 13 - Setup Mode Window - Lantronix Device Server UDS 10 User Manual

*** basic parameters
Hardware: Ethernet Autodetect
IP addr – 0.0.0.0/DHCP/BOOTP/AutoIP, no gateway set
DHCP device name : not set
***************** Security *****************
SNMP is
SNMP Community Name:
Telnet Setup is
TFPT Download is
Port 77Feh is
Web Server is
Enhanced password is disabled
***************** Channel 1 *****************
Baudrate 9600, I/F Mode 4C, Flow 00
Port 10001
Remote IP Adr: --- none ---, Port 00000
Connect Mode : C0
Flush Mode : 00
****************** Expert *******************
TCP Keepalive : 0s
Change Setup

Figure 13 - Setup Mode Window

UDS-10 User Guide
enabled (not IAP firmware)
(not IAP firmware)
enabled
enabled
enabled
enabled
Disconn Mode: 00
(not IAP firmware)
:0 Server configuration
1 Channel 1 configuration
5 Expert settings
6 Security
7 Factory defaults
8 Exit without save
9 Save and exit
(not IAP firmware)
Your choice ?
Configure
3-11