Facing Material - Heat & Glo RED40-N-AU Owner's Manual

D. Facing Material
• Facing and/or fi nishing materials must not interfere with
air fl ow through louvers, operation of louvers or doors,
or access for service.
• Facing and/or fi nishing materials must never overhang
into the glass opening.
• Observe all clearances when applying combustible
materials.
286 mm
(11-1/4 in.)
89 mm
(3-1/2 in.)
89 mm
(3-1/2 in.)
184 mm
(7-1/4 in.)
13 mm
INNER:
(1/2 in.)
10 mm
OUTER:
(3/8 in.)
25 mm
(1 in.)
Figure 13.6 Framing and Framing Materials-RED40
COMBUSTIBLE
FRAMING
10 mm (3/8 in.) THICK
WALL SHEATHING
527 mm (20-3/4 in.)
FACTORY-SUPPLIED
NON-COMBUSTIBLE
BOARD (2)
NON-COMBUSTIBLE BOARD
ON FRONT FACE (SIDE VIEW)
= AIR SPACE
Heat & Glo • RED40-N-AU, RED40ST-N-AU • 2294-900 Rev. G • 7/14
260 mm
(10-1/4 in.)
89 mm 89 mm
(3-1/2 in.) (3-1/2 in.)
184 mm
(7-1/4 in.)
INNER: 13 mm
(1/2 in.)
13 mm
(1/2 in.)
OUTER: 10 mm
(3/8 in.)
Figure 13.7 Framing and Framing Materials-RED40ST
10
mm (3/8 in.) THICK
WALL SHEATHING
COMBUSTIBLE
FRAMING
527 mm (20-3/4 in.)
FACTORY-SUPPLIED
NON-COMBUSTIBLE
BOARD (2)
NON-COMBUSTIBLE BOARD
ON FRONT FACE
SIDE VIEW
= AIR SPACE
61