9. Position the fan so that the arrow on the side of the fan
points toward the interior of the appliance. Arrows are
highlighted by white boxes in Figure 12.15.
Figure 12.15 Proper Blower Orientation on Mounting Bracket
10. Attach new blower to mounting bracket by fastening
the four screws in the appropriate locations. See
Figure 12.16.
Figure 12.16 Proper Blower Mounting
11. Connect electrical cord to the junction cord.
50
Heat & Glo • RED40-N-AU, RED40ST-N-AU • 2294-900 Rev. G • 7/14