Installing The Front Wheel (Front Brake Discs) - Yamaha 2011 FZ8NA(C) Service Manual

c. Turn the front wheel 90° so that the "X
mark is positioned as shown.
d. Release the front wheel.
e. When the wheel stops, put an "X
the bottom of the wheel.
f. Repeat steps (c) through (e) several times
until all the marks come to rest at the same
spot.
g. The spot where all the marks come to rest
is the front wheel's heavy spot "X".
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
3. Adjust:
• Front wheel static balance
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Install a balancing weight "1" onto the rim
exactly opposite the heavy spot "X".
TIP
Start with the lightest weight.
b. Turn the front wheel 90° so that the heavy
spot is positioned as shown.
" c. If the heavy spot does not stay in that posi-
1
tion, install a heavier weight.
d. Repeat steps (b) and (c) until the front
wheel is balanced.
" mark at
2
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
4. Check:
• Front wheel static balance
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Turn the front wheel and make sure it stays
at each position shown.
b. If the front wheel does not remain station-
ary at all of the positions, rebalance it.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS22000
INSTALLING THE FRONT WHEEL (FRONT
BRAKE DISCS)
1. Install:
• Front brake discs
ECA1CW1401
Replace the brake disc bolts with new
ones.
TIP
Tighten the brake disc bolts in stages and in a
crisscross pattern.
4-9
FRONT WHEEL
Front brake disc bolt
18 Nm (1.8 m·kgf, 13 ft·lbf)
LOCTITE®