4. Install:
• Generator rotor cover gasket
• Generator rotor cover "1"
Generator rotor cover bolt (M8)
22 Nm (2.2 m·kgf, 16 ft·lbf)
Generator rotor cover bolt (M6)
12 Nm (1.2 m·kgf, 8.7 ft·lbf)
TIP
• First tighten the M8 bolts and then tighten the
M6 bolts.
• Tighten the generator rotor cover bolts in
stages and in a crisscross pattern.
New
5-35
GENERATOR