EAS25420
CHECKING THE SHIFT SHAFT
1. Check:
• Shift shaft "1"
Bends/damage/wear → Replace.
• Shift shaft spring "2"
• Collar "3"
Damage/wear → Replace.
EAS25430
CHECKING THE STOPPER LEVER
1. Check:
• Stopper lever "1"
Bends/damage → Replace.
Roller turns roughly → Replace the stop-
per lever.
EAS25451
INSTALLING THE SHIFT SHAFT
1. Install:
• Washer
• Stopper lever "1"
• Shift shaft spring stopper "2"
• Stopper lever spring "3"
TIP
• Hook the ends of the stopper lever spring
onto the stopper lever and the spring hook.
• Mesh the stopper lever with the shift drum
segment assembly.
2. Install:
• Bearing
• Washer
• Collar
• Shift shaft spring "1"
• Shift shaft "2"
TIP
Hook the end of the shift shaft spring onto the
shift shaft spring stopper.
3. Install:
• Bearing
• Oil seal
• Washer "1"
• Circlip "2"
New
TIP
Lubricate the oil seal lips with lithium-soap-
based grease.
5-56
SHIFT SHAFT