Yamaha 2011 FZ8NA(C) Service Manual page 139

2. Remove:
• Headlight bolt "1"
3. Remove:
• Headlight bolts "1"
• Headlight unit "2"
4. Remove:
• Headlight coupler "1"
5. Remove:
• Headlight bulb cover "1"
PERIODIC MAINTENANCE
6. Remove:
• Headlight bulb holder "1"
EWA13320
WARNING
Since the headlight bulb gets extremely
hot, keep flammable products and your
hands away from the bulb until it has
cooled down.
7. Install:
• Headlight bulb
Secure the new headlight bulb with the
headlight bulb holder.
ECA13690
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be
adversely affected. If the headlight bulb
gets soiled, thoroughly clean it with a cloth
moistened with alcohol or lacquer thinner.
8. Install:
• Headlight bulb holder
9. Install:
• Headlight bulb cover
10. Connect:
• Headlight coupler
11. Install:
• Headlight unit
TIP
Connect the coupler, then insert the projection
"1" on the headlight unit into the grommet "2"
on the vehicle to fit the headlight unit in its orig-
inal position.
3-30
New