Yamaha 2011 FZ8NA(C) Service Manual page 374

3. Check the turn signal relay.
Refer to "CHECKING THE TURN
SIGNAL RELAY" on page 8-106.
OK↓
4. Check the entire signaling system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK↓
This circuit is OK.
The neutral indicator light fails to come on.
1. Check the neutral switch.
Refer to "CHECKING THE
SWITCHES" on page 8-97.
OK↓
2. Check the relay unit (diode).
Refer to "CHECKING THE RELAY
UNIT (DIODE)" on page 8-107.
OK↓
3. Check the entire signaling system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK↓
Replace the meter assembly.
The oil level warning light fails to come on.
1. Check the oil level switch.
Refer to "CHECKING THE
SWITCHES" on page 8-97.
OK↓
2. Check the entire signaling system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK↓
Replace the meter assembly.
SIGNALING SYSTEM
NG→
Replace the turn signal relay.
NG→
Properly connect or repair the signal-
ing system's wiring.
NG→
Replace the neutral switch.
NG→
Replace the relay unit.
NG→
Properly connect or repair the signal-
ing system's wiring.
NG→
Replace the oil level switch.
NG→
Properly connect or repair the signal-
ing system's wiring.
8-25