Selection Of Operation Modes «Single» Or «Triple» Mode («Double» Mode As Option); Press «140/90» Or «130/80 - Microlife WatchBP Office Targe Instruction Manual

3 measurements are averaged
On the bottom of the right hand section of the
display shows a number to indicate which of
the consecutive measurement is currently
being taken. The readings of these consecutive
measurements are averaged to produce the
routine visit blood pressure measurement.
Press «140/90» or «130/80» button
Press the button ON/OFF «140/90» or ON/OFF
«130/80», to select the preferred target value. The
device will then start to inflate.
Do not remove the cuff between the measurements.
If one of the individual measurements is
questionable, an extra measurement will be taken
automatically.
.Press either the ON/OFF «140/90» or ON/OFF «130/80
*
any time if you want to quit the measurement.
SYS.
mmHg
DIA.
mmHg
PUL.
/min
3
10
EN