Microlife WatchBP Office Targe Instruction Manual page 8

Before using WatchBP Office Target (cont.)
Connect the cuff to the device
Connect the cuff to the device by inserting the cuff
connector into the cuff connector socket.
7
Fitting the cuff properly
1) Place the cuff over the left (right) upper arm so
that the air tube and artery mark arrow point
towards the lower arm.
2) Lay the cuff on the arm. Make sure that the lower
edge of the cuff lies approximately 2 to 3cm ( ¾
to 1 inch) above the elbow.
2-3 cm
(3/4 to 1 inch)