Viewing The Stored Values; Pulse Pressure (Pp) - Microlife WatchBP Office Targe Instruction Manual

Viewing the stored values

The device stores only the blood pressure values
of the last measurement procedure. To view
the stored values, press the M-button when the
instrument is switched off. The display first shows
«A» and then the values.
5 seconds later, the display will change and show
the systolic/diastolic difference with the set target
3
values (140/90 or 130/80), together with the
pulse pressure .
SYS.
mmHg
DIA.
mmHg
PUL.
/min
PP (Pulse Pressure)
The WatchBP Office Target device provides the pulse
pressure (PP) of the patient: pulse pressure = systolic
- diastolic pressure. Each measurement includes
the calculation of a single PP value. The average
measurement will display the average PP value.
When viewing in Memory mode, the PP value will be
displayed with the systolic/diastolic pressure once
every 5 seconds.
12
EN