Deleting The Stored Values; Replacing Slot-In Instruction Card - Microlife WatchBP Office Targe Instruction Manual

Clearing all values
If you are sure that you want to permanently
remove all stored values, hold down the M-button
(the instrument must have been switched off
SYS.
mmHg
beforehand) until «CL» appears and then release
the button. To permanently clear the memory, DIA.
mmHg
press the M-button while «CL» is flashing. Single
PUL.
/min
3
values cannot be cleared.
3
13
Press and hold SYS.
mmHg
DIA.
mmHg
PUL.
/min
Replacing the inserted Instruction Card
You can replace the inserted instruction card by
pulling it out to the side and replacing the paper.
Extra cards are supplied with the instrument for this
purpose.
SYS.
mmHg
DIA.
mmHg
PUL.
/min
3