Microlife WatchBP Office Targe Instruction Manual page 9

3) Wrap and tighten the cuff around the arm.
4) Leave a little free space between the arm of the
patient and the cuff. It must be possible to fit 2
fingers between the arm and the cuff. Clothing
must not restrict the arm. Remove all clothing
covering or constricting the arm to be measured.
5) It may result in incorrect blood pressure readings
if the cuff does not fit properly. Use a different
size cuff if the range index at the end of the cuff
does not fall into the range specified by the
range stripes.
6) Apply the same steps to the other arm if a
measurement of the other arm is required.
*
When the cuff is wrapped
around the arm, the edge of
the cuff should be in the range
which is marked "OK".
8
EN