Microlife WatchBP Office Targe Instruction Manual page 10

Selecting the operation mode: Standard or Triple mode
Select an operation mode
There are two measuring modes to be selected,
Standard mode (standard single measurement) or
Triple mode (automatic triple measurements).
To select Standard mode, slide the switch on the
right side of the device downwards to position «1».
To select Triple mode , slide this switch upwards to
position «3».
9
Automated triple measurements
In «3» Mode, the WatchBP Office Target
device automatically takes three consecutive
measurements at default 15 second intervals.
Because blood pressure constantly fluctuates, a
result determined in this way is more reliable than
one produced by a single measurement.
1
15 sec.
15 seconds of interval is adequate according to «Blood
*
Pressure Monitoring, 2001, 6:145-147» for oscillometric
instruments).
2
3
15 sec.