Recommended tools
The procedures in this document require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
● Plastic scribe
NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
Critical callouts
Default user/admin password for Wyse thin client
Table 3. user/admin password for Wyse thin client
Role
Administrator
User
Service Tag setting
The Service Tag is set using the Service Manufacturing Mode Menu (SMMM). To set the Service Tag, do the following:
1. After replacing the system cover, turn on the thin client.
The Service Menu window is displayed.
WIE10
DellCCCvdi
DellCCCvdi
Disassembly and reassembly
15