Other Connectors; Atx Power Supply Connector (Cn5 And Jp7) - Shuttle FS51 User Manual

Other Connectors

F
E1 ATX Power Supply Connectors (CN5 and JP7)
This motherboard uses 20-pin (CN5) Pentium 4 standard ATX power header,
and JP7 with 1X4-pin +12V PC ATX power supply headers.
Please make sure you plug in the right direction.
P3/P4 ATX Power supply headers
Note
Note 1:
Note 2:
Note 3:
Note 4:
CN5 JP7
This motherboard can't support AC power resumes from
power failure, you must press power button to power-on.
The ATX power connector is directional and cannot be mserted un
less the guides match perfectly making sure that pin#1 is properly
positioned.
Make sure the latch of the ATX power connector clicks into place to
ensure a solid attachment.
Your ATX power supply must be supplied to ACPI +5V standby
power and at least 720mA compatible.
Make sure your power supply have enough power for higher speed
processor installed.
- 36 -
JP7
1
1
CN5
ATXPWR