Shuttle FS51 User Manual page 64

Pentium 4 / celeron , 478-pin processor based ddr main board

Hide thumbs Also See for FS51:

Table of Contents

IDE Burst Mode

Selecting Enabled reduces latency between each drive read/write cycle,

but may cause instability in IDE subsystems that cannot support such

fast performance. If you are getting disk drive errors, try setting this

value to Disabled. This field does not appear when the lnternal PCI/IDE

field, above, is Disabled.

The choice: Enabled or Disabled.

SIS OnChip PCI Device

Options are in its sub-menu.

Press <Enter> to enter the sub-menu of detailed options.

SiS USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB)

controller and you have USB peripherals.

The choice: Enabled or Disabled.

USB Ports Number

The Choice: 6 Ports, 5 Ports, 4 Ports or 3 Ports.

USB 2.0 Supports

The Choice: Enabled or Disabled.

USB Keyboard Supports

This item is used to defined USB Keyboard is Enabled or Disabled.

The Choice: Enabled or Disabled.

SiS AC97 Audio

This item allows you to control the onboard AC97 Audio.

The Choice: Enabled or Disabled.

Onboard Super IO Device

Options are in its sub-menu.

Press <Enter> to enter the sub-menu of detailed options.

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDC) in-

stalled on the system board and you want to use it. If you install add-on

FDC or the system has no floppy drive, select Disabled in this field.

The choice: Enabled or Disabled.

- 62 -

Table of Contents

Show Quick Links

Table of Contents