Step 6 Connect Front Panel Switches/Leds/Speaker/Usb - Shuttle FS51 User Manual

Step 6
Connect Front Panel Switches/LEDs/Speaker/USB
You can find there are several different cables already existing in the system
case and originating from the computer's front-panel devices (HDD LED,
Power LED, Reset Switch, or USB devices etc.) These cables serve to connect
the front-panel switches, LEDs, and USB connectors to the mainboard's front-
panel connectors group (JP3, JP8, JP10), as shown below.
1. ATX Soft Power On/Off (PWON)
2. HDD-LED (HLED)
3. Green-LED and Power-LED (GLED/PLED)
4. Hardware Reset Switch Button (RST)
5. Extended USB Header
PWON
1
GLED
3
PLED
RST
4
USB port 3
HLED
2
1
- 17 -
1
1
5
1 2
+5V +5V
3 4
USBD0- USBD1-
5 6
USBD0+ USBD1+
7 8
GND GND
9 10
N/A
KEY
1
USB port 2
JP3 / JP10