Security Option; Apic Mode - Shuttle FS51 User Manual

Pentium 4 / celeron , 478-pin processor based ddr main board
Hide thumbs Also See for FS51:
Table of Contents

Advertisement

Typematic Rate (Chars/Sec)
This item sets how many times the keystroke will be repented in a
second when you hold the key down.
Ø The choice: 6, 8, 10, 12, 15, 20, 24, or 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat
the keystroke.
Ø The choice: 250, 500, 750, or 1000.

Security Option

Select whether the password is required every time the system boots or
only when you enter setup.
System
The system will not boot and access to Setup will be
denied if the correct password is not entered promptly.
Setup
The system will boot, but access to Setup will be
denied if the correct password is not entered promptly.
Ø The choice: System or Setup.
Note:
To disabled security, select PASSWORD SETTING at Main
Menu, and then you will be asked to enter password. Do not
type anything and just press <Enter>; it will disable security.
Once the security is disabled, the system will boot, and you
can enter Setup freely.

APIC Mode

Selects enable/disable IO APIC function
Ø The choice: Enabled or Disabled.
MPS Version Control For OS
Selects the operating system multiprocessor support version.
Ø The choice: 1.1 or 1.4
OS Select For DRAM > 64MB
Selects the operating system that is running with greater than 64MB of
RAM in the system. Set to OS2 if using more than 64MB and running
OS2.
Ø The choice: Non-OS2 or OS2.
- 57 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents