Front-Panel Connectors Atx Power On/Off Switch Connector (Pwon); Hdd Led Connector (Hled) - Shuttle FS51 User Manual

Front-Panel Connectors
F
ATX Power On/Off Switch Connector (PWON)
C1
The Power On/Off Switch is a momentary type switch used for turning on or off
the system ATX power supply. Attach the connector cable from the Power
Switch to the 2-pin (PWON) header on the mainboard.
Note : Please note that all the LED connectors are directional. If your chassis's

HDD LED Connector (HLED)

C2
Attach the connector cable from the IDE device LED to the 2-pin (HLED) header.
The HDD LED lights up whenever an IDE device is active.
LED does not light up while running, please simply reverse the
direction.
- 31 -
1
1