Other Connectors Atx Power Supply Connector (Jp6) - Shuttle AK32A User Manual

Socketa amd athlon/duron processor based ddr/sdr main board

Table of Contents

Other Connectors

ATX Power Supply Connector (JP6)

Locate the 20-pin male header ATX power connector (JP6) on your

mainboard. Plug the power cable from the ATX power supply unit directly

into JP6 ATX power supply connector.

Note 1:

Note 1: The ATX power connector is directional and will not go in unless

the guides match perfectly making sure that pin#1 is properly

positioned.

Note 2:

Note 2: Make sure the latch of the ATX power connector clicks into place

Note 2:

to ensure a solid attachment.

Note 3:

Note 3: Your ATX power supply must be supplied to ACPI +5V standby

Note 3:

power and at least 720mA compatible.

Note 4:

Note 4: Make sure your power supply have enough power for higher

speed processor installed.

- 38 -

JP6

Table of Contents