Table of Contents
Advertisement
Other Connectorrs
F
ATX Power Supply Connector (ATX1)
E1
Locate the 20-pin male header ATX power connector (ATX1) on your
mainboard. Plug the power cable from the ATX power supply unit directly
into (ATX1) ATX power supply connector.
Note 1: The ATX power connector is directional and will not go in unless the
guides match perfectly making sure that pin#1 is properly positioned.
Note 2: Make sure the latch of the ATX power connector clicks into place to
ensure a solid attachment.
Note 3: Your ATX power supply must be supplied to ACPI +5V standby power
and at least 720mA compatible.
Note 4: Make sure your power supply have enough power for higher speed
processor installed.
Cooling Fan Connectors for CPU (CPUFAN1) and Case
E2~E3
(CASFAN1) Fans
The mainboard provides two onboard 12V cooling fan power connectors to
support CPU (CPUFAN1) and Case (CASFAN1)cooling fans.
S E NS E
Note:
Both cable wiring and type of plug may vary
depending on the fan maker. Keep in mind that the red
wire should always be connected to the +12V header,
and the black wire, to the ground (GND) header.
GND
+ 12
- 34 -
CPUFAN1
CASFAN1
Advertisement
Table of Contents
