Other Connectors; Atx Power Supply Connector (Atx1 And Atx2) - Shuttle FB65 Manual

F

Other Connectors

E1
ATX Power Supply Connectors (ATX1 and ATX2)
This motherboard uses 20-pin (ATX1) Pentium 4 standard ATX power
header, and ATX2 with 1X4-pin +12V PC ATX power supply headers.
Please make sure you plug in the right direction.
Note 1:
Note 2:
Note 3:
Note 4:
P4 ATX Power supply headers
ATX1
The ATX power connector is directional and will not go in unless the
guides match perfectly making sure that pin#1 is properly positioned.
Make sure the latch of the ATX power connector clicks into place to
ensure a solid attachment.
Your ATX power supply must be supplied to ACPI +5V standby power
and at least 720mA compatible.
Make sure your power supply have enough power for higher speed
processor installed.
ATX2
1
- 35 -
ATX12V
1
ATX2
ATX1 ATXPWR