Other Connectors; Atx Power Supply Connectors (Atx1 And Atx2) - Shuttle MT63 Manual

F

Other Connectors

E1

ATX Power Supply Connectors (ATX1 and ATX2)

This motherboard uses 20-pin (ATX2) Pentium 4 standard ATX power
header, and ATX1 with 1X4-pin +12V PC ATX power supply headers.
Please make sure you plug in the right direction.
ATX2
ATX1
Note1:
Note2:
Note3:
Note4:
ATX12V
ATX1
The ATX power connector is directional and will not go in unless
the guides match perfectly making sure that pin#1 is properly po-
sitioned.
Make sure the latch of the ATX power connector clicks into place
to ensure a solid attachment.
Your ATX power supply must be supplied to ACPI +5V standby
power and at least 720mA compatible.
Make sure your power supply have enough power for higher
speed processor installed.
- 34 -