Pilot/Panel Assembly And Installation - Hangar 9 SU-26MM Sukhoi Assembly Manual

32

Pilot/Panel Assembly and Installation

Required Parts
Pilot Pilot hardware
Required Tools and Adhesives
3/32-inch ball driver Threadlock
Music wire, .050-inch (not included)
Flexible adhesive (Shoo Goo or Zap-A-Dap-A-Goo)
Foam-Safe CA

1. Pilot head comes in two pieces with two screws and
washers. Apply threadlock to bolts and pass them through
the lower body of the pilot through the head.

2. Glue the pilot using Shoo Goo to the place allocated in
the canopy.

3. Locate the foam pilot panel and pilot panel decal.
Hangar 9 3.1m Sukhoi SU-26MM ARF Assembly Manual